The Ice-O-Matic ICE0500HA-CD40130 is an air-cooled modular ice machine combined with a hotel ice and water dispenser. This equipment combination comes as two separate equipment pieces and is designed for the modular cuber head to be mounted on the hotel dispenser.
The Ice-O-Matic ICE0500HA ice machine has a production rate of up to 565 pounds of ice in a 24-hour period. The cuber head's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0H00FA is an air-cooled model, and therefore requires a minimum of 6" of vent clearance on the right side and at the back of the unit, for proper air circulation. The Ice-O-Matic ICE0500HA produces Half Cube ice which measures 7/8" x 7/8" x 3/8". This smaller cube is commonly used for ice dispensing and so will work well with the CD40130 ice dispenser. For installation, the Ice-O-Matic ICE0500HA requires a 115 volt electrical connection and a potable water line in. The cuber head also needs an external drain for any mineral-laden water purged at the end of each ice-making cycle. Note that the ICE0500HA only uses 19 gallons of water for every 100 pounds of ice it produces. Plus, Ice-O-Matic has also incorporated its Harvest-Assist technology into the ICE0500HA in order to speed up the removal of ice from the evaporator surface. These efficiencies save water and electricity over the life of the unit, earning the ICE0500HA an ENERGY STAR rating.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice and water dispenser. By itself, the CD40130 dispenser unit stands 54 inches tall. In addition to dispensing ice, the CD40130 dispenser also has a factory-installed water dispensing chute for additional convenience (note that the CD40130 dispenser will require its own incoming potable water line separate from the cuber head water line). For storage, the hotel ice dispenser has its own built-in bin with a capacity of up to 180 pounds of ice. Even with all of these features, the Ice-O-Matic CD40130 unit has a compact cabinet, allowing convenient ice and water dispensing in locations with limited space. With its push activation feature, a large dispensing chute, and a wide ice-filling area, the CD40130 can accommodate most ice buckets. Ice-O-Matic has also included its Turbo Dispense technology, which allows ice dispensing at speeds of 1/4 pound of per second. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires an external drain for water at the bottom of the dispenser's bin (the cuber head and the ice dispenser can use the same external drain).
Both the ICE0500HA and the CD40130 units are 30 inches wide and the entire equipment configuration stands 74 inches high. With these external dimensions, plus the 565 LB daily ice production rate and the 180 LB bin capacity, the ICE0500HA-CD40130 combo would suit a business with moderate ice requirements and restrictions on wall space and ceiling height.