Ice-O-Matic ICE0606HW-CD40030 618 LB 30" Water-Cooled Ice Machine w/ CD40030 Hotel Dispenser
The Ice-O-Matic ICE0606HW-CD40030 is a combination of the Ice-O-Matic ICE0606HW ice machine and the CD40030 hotel ice dispenser. The ICE0606HW cuber head is designed to be mounted on top of the CD40030 dispenser.
The Ice-O-Matic ICE0606HW cuber head is only 20" tall and 30" wide. The cuber head's cabinet is constructed from a durable stainless steel front panel and fingerprint-proof plastic side panels. The ICE0606HW is capable of producing 618 pounds of Half Cube ice every 24 hours. The Half Cube produced by the ICE0606HW measures 7/8" x 7/8" x 3/8" and this smaller cube works well in dispensers because they are less likely to jam the dispenser. In addition, retailers select the Half Cube for their beverages because more of the Half Cubes can fit in each glass, which means there is less beverage per serving.
When planning on your installation location, note that the Ice-O-Matic ICE0606HW requires a 208-230 volt electrical connection and 2 incoming water lines. The first water line should be potable water for making the ice (19.5 gallons of water per 100 pounds of ice). The second water line uses significantly more water because it is used to cool the condenser (it works out to an additional 140 gallons of water per 100 pounds of ice produced will be flushed). The Ice-O-Matic ICE0606HW therefore requires an external drain that can handle the high volume of water. There is a small amount of mineral-laden water purged at the end of each ice making cycle. However, ALL of the condenser water must be drained, which can work out to 865 Gallons of water over the course of 24 hours of ice making. One benefit of having a water-cooled ice machine is that there will be no hot air discharged into the location, so the work environment remains cooler. Also, water-cooled ice machines don't need any side clearances for air vents, so the Ice-O-Matic ICE0606HW can be installed directly adjacent to other equipment or in narrow spaces.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a freestanding unit measuring 30 inches wide and 54 inches tall. The ICE0606HW mounts on top of the dispenser and drops its ice into the CD40030's 180-pound capacity, built-in bin. The dispenser has a push activation feature, a large dispensing chute, and a wide ice-filling area so that nearly any ice bucket can be used. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a speed of 1/4 pound of ice per second. The CD40030's cabinet exterior is also smudge and fingerprint proof. For proper installation of the Ice-O-Matic CD40030, the location will require a 115-Volt, 60Hz, 1-Phase electrical power source. Please note that the hotel ice dispenser also needs an external drain for water forming in the bin from melting ice (you can use the same external drain for both the ice machine and the ice dispenser).
When properly configured, the ICE0606HW-CD40030 equipment combination stands 74 inches high and 30 inches wide. With these external dimensions, plus the production and storage capacities of the units, the ICE0606HW-CD40030 cuber/dispenser combo is a smart choice for a business that has limited space for installation and moderate daily ice consumption.
- Ice-O-Matic ICE0606HW Features
- ICE Series Modular Cube Ice Machine
- Up to 618 LB ice production / 24 hours
- Half Cube Style Ice
- Water-cooled condenser
- 30" Wide Cuber Head is Low Profile at 20" High
- Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
- PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
- Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
- 208-230v/60Hz/1-ph, 10.0 amps
Ice-O-Matic CD40030 Features
- Vending Hotel Ice Dispenser
- Floor Model, Push Activated Dispensing
- 180 LB Ice Storage Capacity, 30" Wide
- Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
- 115v/60/1-ph, 2.1 amps
|Ship Weight||170 LB|
|24 Hour Yield||618 LB|
|Ice Type||Half Cube|
|Dimensions(HxWxD)||20.06" x 30.13" x 24.25"|
|Voltage||208-230 volts, 60Hz, 1-phase|
|Power Usage||4.2 kWH / 100LB of Ice|
|Water Usage||19.5 gal/100 LB|
|Water Usage for Condenser||140 gal/100 LB of Ice|
|Ship Weight||220 lLB|
|Dimensions(HxWxD)||53.25" x 30" x 33.5"|
|Voltage||115volts, 60hz, 1-phase|
A PDF viewer is required to view this product's information.:Download Manufacturer's Specification Sheet